Hot-air sterilizer GPO-150
- Article
-
389114
|
-
Sterilizers are used in medical, outpatient, sanatory, outpatient and other health care institutions and aimed for:
• surgical garb and surgical dressing sterilizing;
• surgical materials and products for medical purposes sterilization;
• heat treating of laboratory dishes .
UOSlab® Trade Mark Sterilizers have number of advantages:
• Six sterilizing modes with quick selection capability or required parameter set setting;
• All necessary sterilizing mode information is indicated on the LCD display of PID controller placed on the face plate;
• overheat protective system;
• stainless steel chamber;
• rounded corners allow to wash and clean working chamber easily;
• 18 month maintenance warranty period;
• Cost-efficient prices for post-warranty maintenance.
ТМ UOSlab® sterilizers with the capacity size up to 300 L have medical registration: Certificate # 12004/2012 dated 09.11.2012 -
- validation port
- control humidity in the chamber system
- calibration report
- metrological certification
- door lock
- accent lighting
- perforated and lattice pans (shelves)
- interface for connection to a computer and the cabinet work
- the ability to complete special trays (cassettes)
- vision panel made of heat-resistant tempered glass
- stainless steel cabinet housing
- accelerated drying system
- heat-recovery system
- the possibility of non-standard design and special requirements
- stand on wheels under the cabinet
-
Temperature range from 5 °C above room temperature to 200 °C | 200/300 |
Maximum difference of temperature in chamber volume, °С | -1/+5 |
Minimum programmable increment of temperature, °C | 1 |
Time requed to heat to 180 ° C, min (loaded/unloaded) | <55 / <25 |
Power supply, V | 220 V |
Current frequency, Hz | 50 Hz |
Power consumption, kW | 3100 |
Connection, phases | 1~ |
Number of shelves (standard / max), pcs | 7/7 |
Interior volume, l | 152 |
Number of doors | 1 |
Weight (without load), kg | 57,77 |
Maximum shelf load, kg | 14 |
Internal dimension of chamber (WDH), mm | 501×601×602 |
Overall dimensions (WDH), mm | 700×932×790 |
*on request, it is possible to increase the maximum temperature up to 250 °C, for the depyrogenation mode (240/30) | . |